345L 35 Vacuum Film Pulling Synchronous Belt for Vertical Packing Machines

• Customization: Available
• After-sales Service: Service for Life
• Warranty: One Year
• Model NO.: 345L 35
• Material Capabilities: Rubber
• Type: Synchronous Belt
• Transport Package: Case
• Specification: 345L Toothed Type Red Rubber Coating
• Trademark: P&Q
• Origin: China
• HS Code: 8422303090
• Production Capacity: 50000pieces/Year

Product Description

Product Description

345L 35 Toothed Type Red Rubber Coating Vacuum Driving Synchronous Belt for Vertical Packing Machines from Anhui Zengran Packaging Technology Co., Ltd and other packing machine companies. 

 

Application

VFFS packing machine 

MATERIAL:
rubber

IMPORTANT NOTES:
1. When purchasing, pay attention to the clean surface of the product, the belt is not twisted and deformed, and the teeth are full.
2. The synchronous belt products must be strictly prohibited from twists and turns, so as not to damage the skeleton material and affect the strength of the belt.
3. Synchronous belt products must not scratch the belt to avoid early damage to the belt.
4. Avoid contacting the timing belt products with chemicals (especially strong oxidizing acids, such as concentrated sulfuric acid, etc.).
5. Try to avoid long-term contact with oil and water for timing belt products.
6. When replacing the synchronous belt, the tension of the belt must be reduced to the minimum before it can be taken out. It is strictly forbidden to use non-professional tools to pry off the synchronous belt with high tension.


PRODUCT PICTURES




PACKING 


CUSTOMIZATION ACCEPTABLE 
345L 35 toothed type red rubber coating vacuum driving synchronous belt is one of the most commonly used synchronous belt by Anhui Zengran Packging Technology Co., Ltd. We also accept cusomization of synchronous belt based on user's requirements:

1. Choice of bottom belt: rubber synchronous belt or PU (polyurethane) synchronous belt, both are acceptable.

2. Slotting processing: the specific width and depth of the bottom belt grooving are specified by the customer.

3. Glue processing: the color, material (rubber/PU glue), thickness and hardness of the glue are specified by the customer.

4. Hole processing: The size of the hole is specified by the customer.

5. Surface counterbore processing: the size, direction and height are specified by the customer.